Owatrol Net-Trol

Cleans restores faded wood, stone, concrete, plastics, amazing results.

Wood cleaner and colour restorer – restores greyed, weathered wood to its original look (See Video)

• Lightens and restores colour to all greyed, weathered wood without bleaching
• Non-aggressive – harmless to plants, shrubs and surface being cleaned
• Also cleans and rejuvenates, plastic, gel coat, stone and cement
• Fast-acting – restores wood to its natural colour in just 15 minutes
• Can be used as a neutraliser after using Dilunett, Aquanett or another stripper

Properties

• Restores colour to all greyed weathered wood without bleaching.
• Cleans and neutralises staining caused by tannins.
• Removes all traces of weathering attributed to mould, mildew, pollution …
• Restores lustre to plastics dulled by weathering and UV rays.
• Use as a neutraliser after using Dilunett, Aquanett or Prepdeck.
• Excellent degreaser for tropical hardwoods prior to applying Deks Olje D1 saturator
• Non aggressive – harmless to plants and shrubs.
• Biodegradable – Does not contain solvents or bleach – rinse with water.

Where to use

• Exterior wood – weathered grey or dirty: Cedar, Larch, Pine (pressure treated or not), Teak, Iroko, Ipe
• Horizontal or Vertical surfaces : cladding, fences, decks (boat garden), garden furniture…
• Other surfaces: rust stained cement, discoloured stone, plastic, GRP.
• Net-Trol is also used to neutralise a surface after stripping with Dilunett.
• Net-Trol is used to neutralise after stripping off decking oil etc with Prepdeck (Stripper Cleaner)

Directions

• Shake container well before use.
• Wet surface with fresh, clean water.
• Apply Net-trol with a synthetic brush or roller (long pile).
• Agitate surface with a stiff nylon/synthetic brush.
• Leave to stand for approx 10-20 minutes. If surface starts to dry, dampen with a mist application of water
• Scrub surface with a stiff nylon/synthetic brush whilst rinsing with water or use a pressure washer (max. 60 bar).
• If required repeat procedure.
• Refer to packaging for instructions.

Coverage : 5 to 10m²/l

Application tools : Stiff bristle - brush

Application temperature : 5°C to +35°C

Working time : 5 to 20 min.

Clean-up : Water