Geared eccentric sander ROTEX RO 90 DX FEQ-Plus 240V

In stock
Product Details


Round tool that also sands in corners.

Four devices in one: Smaller pad. Greater versatility. The new ROTEX RO 90 geared eccentric sander with the tried-and-tested ROTEX principle makes quick work of coarse sanding, fine sanding and polishing tasks. Now suitable for working in corners: The FastFix interface can be used to replace the sanding or polishing pad with a triangular pad, and the ROTEX RO 90 becomes a delta sander.

  • FastFix sanding pad system, tool-less
  • Eccentric motion for high-quality, scratch-free surfaces
  • Sanding up to the edge thanks to the Festool PROTECTOR
  • Ideal ergonomic grip positions
  • ROTEX rotary motion for efficient material removal
  • Four tools in one: for coarse sanding, fine sanding, delta sanding and polishing. Resulting in low investment costs and savings on working time
  • Effortless work thanks to a weight <1.5 kg

Product highlights

Achieve ideal results more quickly:

  • Four tools in one – for coarse sanding, fine sanding, polishing and as a delta sander. Pads can be changed quickly and without tools thanks to FastFix.

Convenient and safe:

  • Compact, handy and, thanks to its low weight, ideal for overhead work.

Systems get it done:

  • The right tool for any surface application – sanding pads in a range of hardnesses and abrasives which are perfectly adapted to the pad and extraction.

Product details

RO 90 DX FEQ-Plus 240V

Powerful 4-in-1 solution

  • For the very first time, a single tool can be used for coarse sanding, fine sanding, polishing and delta sanding. Reduced initial costs, maximum flexibility and a larger range of applications. Greater efficiency and time savings at the construction or assembly site.

Coarse sanding

  • Maximum material removal with the ROTEX rotary motion: The displaced eccentric/rotational motion removes large quantities of material in no time at all.

Fine sanding

  • The classic eccentric motion for intermediate and fine sanding. Extra-fine sanding finish, excellent surface quality.


  • A world first: The StickFix sanding pad transforms the ROTEX into a triangle sander. Maximum material removal capacity on small surfaces with angles, corners and edges.


  • The ROTEX rotary motion combined with Festool polishes and polishing sponges produce gleaming results without heating the surface significantly.

Removes up to three times more material

  • The high -performance ROTEX motor and the combination of eccentric and rotary motion removes significantly more material than a conventional random orbit sander. Durable eccentric bearings extend the service life of the machine.

Protects the sanding pad and workpiece

  • Sand safely against abutting edges without the risk of kickback with the Festool PROTECTOR – in three sizes for various angles and window frames.

Effective sanding pad brake

  • The sanding pad brake prevents the sanding pad from turning upwards. It prevents the surface being scratched during sanding and eliminates the need for rework.

Cost-saving work

  • The tip of the delta sanding pad and abrasive can be used three times simply by rotating.

Extremely lightweight and efficient

  • Maximum surface quality in fine sanding and polishing applications.

Short set-up times

  • The FastFix interface enables quick changes between sanding pad, polishing pad and triangular pad without requiring tools.

Faster abrasive changes

  • Achieving the perfect surface quality depends on the smallest of details. Festool abrasives are therefore quickly replaced using the practical StickFix system, and adhere reliably and without slipping.

Lightweight and ergonomic

  • The different grip positions, particularly ergonomic soft-grip zones and low weight allow you to guide the ROTEX RO 90 with one hand on vertical and overhead surfaces without your arms tiring.

Healthy and dust-free

  • Optimum dust extraction with the established Jetstream principle. For less dust and for generating less heat and for ensuring that the abrasive and fastener do not clog as readily.

Because clean is simply healthier

  • Clean workplace with the Festool mobile dust extractors from the CT series. Compact and lightweight, ideal for assembly tasks and the perfect companion for the ROTEX RO 90.

Pure eccentric motion and ROTEX rotary motion

  • The eccentric motion alone guarantees a smooth sanding pattern. If the rotational motion is added to this, you achieve a high rate of material removal in coarse sanding and an extraordinary degree of gloss when polishing high-gloss surfaces.

Ideal for assembly

  • Unbeatable in a team: The ROTEX RO 90 DX geared eccentric sander and the CTL SYS Systainer extractor. The RO 90 DX produces perfect surfaces, and the efficient dust extraction with the Jetstream principle transports the dust directly to the CTL SYS. The appliance socket with automatic switch-on/off activates the CTL SYS as soon as you start up the connected RO 90.


Main applications

  • Sanding off paint and varnishes on window frames
  • Ideal for vertical surfaces or overhead work
  • Sanding feather-and-groove joints
  • Sanding in angles, corners and edges - when work in tight spaces is required
  • Sanding louvres with a special pad
  • Performing SPOT REPAIR applications in body area

Technical Data

Technical data
Power consumption
400 W
ROTEX rotary motion speed
260 - 520 min⁻¹
Eccentric motion speed
3 500 - 7 000 min⁻¹
Sanding stroke
3.00 mm
FastFix sanding pad dia.
90.00 mm
Dust extraction connection dia.
27 mm
1.50 kg
Drive type


Main applications

  • For cleaning offices, workshops, garages, motor vehicles and construction sites
  • Absorbing water

Technical Data

Technical data
Power consumption
350 – 1 200 W
Max. volume flow
3700.00 l/min
Max. vacuum
24000.00 Pa
Filter surface area
3369.00 cm²
Rubber-insulated mains cable
5.50 m
Container/filter bag capacity
15/12.5 l
Dimensions (L x W x H)
470 x 320 x 430 mm
Max. appliance socket connected load
2200.00 W
11.20 kg
Drive type

Save this product for later